Analog LCD
ARGB1 - LCD Controller for TFT Flat Panels

Download ARGB1 Manual

Features include:

• Standard Analog VGA input (VGA, SVGA, XGA)
• Converts fixed resolution LCD into a multi-sync monitor.
• Universal panel interface for single or dual pixel per clock, 18 bit or 24 bit bits per pixel
• Switching power supply and regulators for 12V, 5V, and 3.3V panels
• Universal Inverter interface adapts to all inverter types and interfaces

Analog Multi-Sync LCD controller

• Connects standard 15 pin VGA output to LCD panels
• Supports either standard VGA connector (HD-15) , or low profile connector for video input
• Supports QVGA, VGA, SVGA, XGA panels at 18 / 24 bits per pixel
• On Screen Display (OSD) controls
• Auto-detect sync and phase adjustment
• Full screen expansion for display modes with lower resolution than the panel
• Based on the same controller chip used in popular LCD monitors
• Excellent picture quality

Plug & Play

• Seamless interface to legacy computers with analog VGA style connector
• Full DDC2B support for Windows
• Simple setup – works just like a standard CRT monitor

Efficient Power Operation

• 12V input powers board and panel inverter
• Switching regulator to minimize power consumption and heat generation
• Panel power selectable 12V, 5V, or 3.3V

Simplified Cabling

• 33 pin Flat flex connector for QVGA panels
• DF9 connectors support lightweight flat flex cabling to VGA and SVGA panels
• Modular connectors for scaling from single to dual pixel, and from 18 to 24 bit per pixel
• Single cable connects to backlight inverter using the same high density connectors used by most inverters
• Reach provides cabling for all panel types