PLRC2 PanelLink Specifications
DVI 1.0 PanelLink™ Interface
- Compatible with popular DVI compatible graphics cards
from ATI, Appian, and Matrox, Nvidia
- Supports resolutions up to SXGA (1280x1024) at 24 bits
per pixel
- Allows cable runs of up to 10 meters from computer to
monitor
Efficient Power Operation
- 12V input powers board and panel’s inverter
- Switching regulator to minimize power consumption and
heat generation
- Panel power selectable 5V or 3.3V
Simplified Cabling
- DF9 connectors support lightweight flat flex cabling
to VGA and SVGA panels
- Modular connectors for scaling from single to dual pixel,
and from 18 to 24 bit per pixel
- Single cable connects to backlight inverter using the
same high density connectors used by most inverters
- Reach provides cabling for all panel types
Universal Backlight Inverter
Interface
- Jumpers support either positive or negative enable with
adjustable high level voltage
- Brightness Vmax. and Vmin adjustable; PWM optional
- Brightness control via DPMS, external control, or software
| Board Specifications |
| Board Size |
3"W x 4"H / 7.62mmW
x 10.16mm |
| Operating Temperature |
0° to 50°C |
| Inverter Connector |
Molex 53261-0890 |
| EDID / DDC2B |
Yes |
| Power input |
12VDC, supply current panel dependent;
typically 1A for common SVGA panel including backlight |
| Storage Temperature |
0° to 50°C |
| Panel Connectors |
DF9-31P, DF9-41P, DF13-30DP, DF13-20DP |
| Power Management |
Windows DPMS compatible |
Options
- Custom designs available (no touch, smaller size)
- On-board microprocessor for multi-panel support
- - 12V input
|
